SICOMA MEO Twin Shaft Concrete Mixers - Sicoma Mixers - Sicoma Indonesia Official Agent & Licensed Distributor - PT Karya Mandiri Anugerah Sicoma Mixers Indonesia Article

SICOMA MEO Twin Shaft Concrete Mixers is one type of SICOMA twin shaft concrete mixers, which mainly consists of tank system, mixing system, drive system, seal lubricant system, exhaust system and electrical system. Horizontal horizontal axis is rotated at high speed, resulting in convection, so that the mixing process of aggregate, water, cement and additives is complete. SICOMA MEO Twin Shaft Concrete Mixers are used to mix powder and granular inertia materials. And as one of the SICOMA twin-shaft concrete mixers, SICOMA MEO Twin Shaft Concrete Mixers are widely used to mix commercial concrete, premix concrete, and precast concrete, and others. With much higher performance than other mixers, SICOMA Mixers twin shafts that require a concrete mixer are particularly suitable. For all large and medium-sized concrete projects. SICOMA MEO Twin Shaft Concrete Mixers have the following characteristics: #1 SICOMA MEO Twin Shaft Concrete Mixers are equipped with several shaft seal shields. #2 Equipped with manual lubricating pump. #3 Can be equipped with 380V AC electrical lubricating pump and mixer monitoring system. #4 Strong anti-overload capability and low noise from the SICOMA axle concrete mixer thereby making engine operation reliable. #5 With the convenience to maintain and reasonable SICOMA spare part prices an effective, cost-effective mixer is required. #6 As for capacity, there is 0.75 m3 ~ 3.0m3 for choice. SICOMA MEO Twin Shaft Concrete Mixers and SICOMA MEO Twin Shaft Concrete Mixer parts Working principle SICOMA MEO Twin Shaft Concrete Mixers When the power button is on, the SICOMA Concrete Mixers driver system (including mixing motors, seat belts, clutches, gear boxes, connection sets, chrysanthemum shafts, and chrysanthemum sets, etc.) reduces high rotational speed to low speed, and strength. Passing two shaft mixing by chrysanthemum shaft and set. This force carries two parallel twin shafts rotating in different directions. Direction clockwise as the head of the shaft leads to the right of head or tip; The direction is counterclockwise as it turns left. Thus, the material will be well blended and perfect in a short time.